Categories

False alarms and system hiccups can be exasperating, and even worse, could prevent your home security system from working how it should. Thankfully, most issues, from false alarms to dead batteries, are simple to fix. Explore our tips for troubleshooting your home alarm system in Eugene. We’ll help you keep your family members safeguarded and your system operating smoothly.

Test Your Home Security System In Eugene

One of the most effective ways to troubleshoot your property’s security is to test it! Newer systems have a test mode so you don’t by accident prompt an emergency call. Once in test mode, take these steps:

• Arm your system as you normally would when going out.
• Open a door or window that has a contact sensor, or test other devices. Shut the window or door once you’re done so it doesn’t trip the alarm as you switch the system back on.
• Allow the alarm to resonate for 60 seconds to make sure a message is sent to the security provider and an entry is created in the alarm activity log.
• Proceed to test sensors as you wish
• Inspect the systems’s activity log to validate that everything’s working.

No need to worry, monitoring professionals will know that your system is being tested. Just be sure to turn test mode off when complete. It’s a good idea to test once a month or whenever you make changes to your home’s internet or phone connectivity.

Check The Positioning And Condition Of Motion Detectors

Although an integral part of your alarm system, motion sensors are prone to false alarms. Prevent them with a few simple troubleshooting steps.

• Perform a physical check. Are there objects that could move within the path of the sensor, like drapery blown in a breeze?
• Is the sensor dirty? Cobwebs, dirt, and grime can cause poor performance. Ensure the device is clean.
• Does the motion detector have pet immunity you can turn on? Some models can be configured to ignore pets weighing up to 100 pounds.
• When was the battery replaced? A nearly depleted battery can affect performance or lead to false alarms.
• Is the sensor pointing toward a source of heat? Excess heat from direct sun or a fireplace can cause an alarm.

Keep Batteries Ready And Pay Attention To Low Battery Warnings

One helpful aspect of modern home security systems is that they’ll alert you when batteries are dying. If your system has a control panel or smartphone app, you’ll typically discover alerts there. Depending on the alarm, you may notice an intermittent beep when batteries are low. 

Motion detectors, smoke detectors, contact sensors, and other wireless tools have batteries that need to be replaced every 1 to 2 years. It’s best to keep batteries on hand and establish a replacement schedule. Many systems also have a backup battery for the primary control panel. This battery keeps your system operating if your power goes out and should charge back up once power is restored. If it doesn’t recharge, you will have to replace it.

Troubleshooting Is Easy With ADT Home Security In Eugene 

As the foremost name in home security, ADT builds systems that provide unsurpassed functionality and convenience. Getting into test mode is straightforward through MyADT.com or the ADT+ app, and you’ll always be sent notifications when a battery is running low. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system perfectly suited to your Eugene home. Dial (541) 210-9214 or complete our form today!